Periodically, HY-TEK provides FREE Maintenance Updates that include new features and corrections to reported problems. In order to download and install the current TM Maintenance Update, make sure you are connected to the Internet either through broadband (DSL or Cable) or dial-up and then start TM and click on Check for Updates from the Main Menu Bar.
TM will verify the Internet connection and then check the TM Update site to see if you are running the current release. If you are already running the most current TM 4.0 release, TM will tell you - just click OK and continue. If you are not running the current TM release, TM will download that update for you and show a download progress bar.
After the download has been completed, TM will ask if you want to install it now.
Click on the Yes button and TM will install the update and then restart TM for you. After TM has restarted, click on Help / Release Notes to check out the new features that have been included in the update. If you click on the No button when asked to install it now, you can always install the update later by clicking on File / Install Update. The update file is named SwTM4Update.Zip and is always stored in the Download folder under your installation directory - probably c:\hay-sport\TM4\Download.
| NOTE: Installing an update will have no impact on your database.
|
|
|
| NOTE: If you have Firewall software on the computer you are using to Check for Updates, you may have to turn the Firewall software off, Check for Updates, then turn the Firewall software back on. Or, you may want to use the Alternative Method for Installing a Maintenance Update as described below.
|
Alternative Method for Installing a Maintenance Update
Go to the HY-TEK web site at www.hy-tekltd.com
