| · | When creating the Meet Summary Report for showing improved times, the check box for Count NT for Improvement did not work, and this is corrected.
|
| · | If you purge results and entries from a completed event that had results, and then use the Unseeded button in the Run to enter results using competitor number, the module prevented you from entering a competitor number that had results prior to the purge. This is corrected.
|
| · | If Seeding an event with Two Per Choice selected in a two per lane arrangement, an error occurred and this is corrected.
|
| · | If Report Preferences were set to Show Birth Year in place of age, the Meet Program and Results Reports did not show the time standards tag next to the result or seed times, and this is corrected.
|
| · | There is a correction to total team points for Male or Female in the Run Menu when clicking Re-Score or Score Event. This only involved relays, and under certain conditions, the relay points for the male team could be added to the female team and vice versa. The team scores from Reports / Scores was unaffected. This problem began with the Nov 4, 2005 update.
|
| · | When creating High Point individual scores from Reports / Scores, events that were mixed without being configured as multi-age group were not included in the High Point score for males or females. Now these events are now included and separated into the appropriate male and female high point totals.
|
| · | When navigating the three columns of backup times in the Run Menu, the Shift-Tab key combination now works to allow backwards navigation.
|
| · | When creating results in the Dual Meet format for 3+ dual meets, the report preference to Suppress the small "x" did not suppress the x, and this is corrected.
|
| · | When scoring 3+ dual meets and displaying combined scores, the combined score was only correct for the first team pairing and this has been corrected.
|
| · | When clicking the Awards button in the Run Menu for a multi-age group relay event, an error that occurred has been resolved.
|
| · | There is a new feature in the Purge Menu to remove blank splits in cases where all the odd splits are blank because the Timing Console was set to Near and Far End Splits, but there were no pads at the far end. If the odd splits are blank, MM cannot properly display subtracted splits and when TEAM MANAGER imports the results, the splits will be incorrect.
|
| · | The Favorite Directory choices are now stored with the computer rather than the database so that the computer user can always keep their personal preferences for the Favorite Directories.
|
| · | If you are running split sessions for a timed final event, such as the 500, you can now alternate heats by gender for the second session where you have two or more heats from each gender competing in the second session.
|
| · | There is a correction to the Meet Summary report when displaying relay names. If there were Prelims and Finals, the prelim relay names were displayed instead of the finals relay names if the prelim relay time was faster than the final relay time.
|
| · | When selecting the COM port for a timer, you could select port numbers 1-8 and 10-16. You can now also select port 9.
|
| · | There was a problem displaying dual meet team scores to a Daktronics scoreboard and this has been corrected.
|
| · | The export of Results for SWIMS has been corrected to include the actual day of the each swim with each result rather than simply the first day of the meet.
|
| · | When entering results by lane, if the event was seeded with outside lanes only, such as with a 4 lane setup in lanes 5 thru 8, you could only enter results for the empty lanes 1-4 and could not enter results for lanes 5-8. This sort of special situation has been corrected.
|
| · | The menu choices for Export of Athletes / Teams has been corrected for the Export Types.
|
| · | The Exceptions Report has a new option to list only athletes who had a No Show NS for one or more individual results.
|
| · | The Exceptions Report option for listing athletes who did not compete has been changed to No Splash Athletes to match the similar report in Athlete Reports, but has the added feature of showing how many events were scratched and how many were no shows, if any.
|
| · | The Lane / Timer Sheet in continuous format have the bottom margin increased by .2 inches to accommodate some printer's margin limits.
|
| · | The new feature to limit athlete initials to alphabetical names prevented entering A for the initial and this is corrected.
|
| · | When using the Build ID for USA Swimming registration ID's, an apostrophe in the last name is removed from the ID.
|
| · | When entering athletes, the middle initial is now restricted to alphabetical characters only or blank.
|
| · | When scoring using Improvement Points and awarding points for DQ's, if every entry in a given heat was Disqualified, no points were given to any entry in the heat. This has been corrected.
|
| · | In the Run Menu, a menu choice to go to the Relays Menu directly has been added at the top.
|
| · | When exporting results to TEAM MANAGER or SWIMS, a new option is available to limit the export to only athletes who have a USA Swimming ID.
|
| · | The global replacement of entry fees has a new option to replace all Time Trial events with a given entry fee. In addition, an event set up as a Swim-off will always remain with a zero entry fee.
|
| · | There is a new report preference to suppress splits for relay results that are DQ's, and the previous option to suppress splits for all results that are DQ's has been revised to apply to individual events only.
|
| · | The new generic records application in the Record / POP Forms Menu has the added feature to enter the meet referee and admin referee name so that they appear on the application signature line.
|
| · | There is a correction to seeding of diving events when the meet is a dual or 3+ dual meet using assigned lanes.
|
| · | You can now export the MM 2.0 database to an MS Access database that is not password protected. This is useful if you want to manipulate the data for statistical purposes using MS Access, Excel or some other tool that can import or convert an Access database. You can export Athletes and Teams with the option to include Entries and/or Results.
|
| · | For the time line in Sessions and in the Meet Program, you can now add an extra interval time for backstroke heats and medley relay heats. These heats usually take longer because of the time needed for swimmers to get into the water. The default setting is 15 seconds extra.
|
| · | The Check-in Report has a new feature where you can filter the lists to an alphabet range of last names such as listing only A thru M last names. This is useful in large meets that are not pre-seeded.
|
| · | Relay results are now shown in the Athlete Menu along with individual results when you click the Show Results and the Show Relays check boxes.
|
| · | The Build ID feature for UK athlete ID's has been removed because the ASA in the UK has gone to a pre-assigned ID number rather than one created from the athlete name and birth date.
|
| · | A new Record / POP Forms Menu has been added to the Reports Menu. The existing USA Masters record applications option has been moved from the Meet Summary to this new menu. The NCAA POP forms option has been moved from the Exceptions Report to this new menu. A new design allows you to select one or more specific events rather than just a session.
|
| · | A new generic records application option has been added to the new Record / POP Forms Menu which allows you to print record applications for new Age Group or Open records. The format is generic enough that almost any organization can use it. You can customize the title, notes at the top, and notes at the bottom of the application to fit your needs.
|
| · | When creating the dual meet format for results with Divisions by Event, an error would occur if there were no events selected for a given division and this has been corrected.
|
| · | There is a new option in Report Preferences to Suppress Splits for results that are a DQ.
|
| · | New error trapping code has been added to prevent the randomly occurring Method of Object error that a number of users have reported.
|
| · | Record Breaker labels are now created for relays that have missing relay names.
|
| · | The Medals Count report has been revised to not include Swim-Off events and Time Trial events in the medal count.
|
| · | When electing to not show seed times on the Meet Program, alternates still showed seed times and this is corrected.
|
| · | When using the Heat Malfunction module in the Time Adjustment Calculation, an error occurred and this is corrected.
|
| · | When using Proof Of Time in the Exceptions Report, 1500 SCM and 1500 LCM times were not matched properly and this is corrected.
|
| · | For Award Labels, they will now show the primary Team Abbreviation and the Second Club instead of the primary Team Name if Show 2nd Club with Primary Team is selected in Report Preferences.
|
| · | When editing a relay event to change it from Prelims/Finals to Finals only, you are given the option to copy the prelims relay names into the finals relay name slots.
|
| · | The Preferences for Listing Results from the Run Menu has the added option for each age group to be on a separate page when multi-age groups are used.
|
| · | When creating a Team Entry Fee Report and including the details of entry fees for each athlete, the totals did not match the standard entry fee report if there were relays with no names or if there was a team or facility surcharge. The detailed entry free report total entry fee for each team now matches the standard entry fee report and has a detail line added to indicate the charges for relays with no names and detail lines added for team and facility fees.
|
| · | If the Report Preferences are set to show country code with the team name, the Teams Report now includes the country code.
|
| · | The JD window from the Run Menu now shows Heat and Lane number instead of just the Heat number for each entry.
|
| · | When printing award labels for high point from Reports / Scores, if there was a tie for say 3rd, one label showed 3rd and the other showed 4th instead of both showing 3rd.
|
| · | When exporting results to TM, an error sometimes occurred on relay events setup as mixed multi-age group.
|
| · | Dual meet seeding could get a subscript out of range error if a team was assigned to say lanes 1-3-5 and then the team was deleted from the database.
|
| · | You can now use File / Export / Advancers to advance athletes and relays based solely on a Time Standard.
|
| · | When creating an Entry Fee report from Reports / Teams, there is a new option to Include Exhibition Swims or not.
|
| · | If you were using a Timing Console, Results by Lane was disabled. Now it is enabled so that you can easily check the lane timer sheets by lane for the backup watch times. However, to Get Times from the timer, you must uncheck the Results by Lane.
|
| · | When using File / Repair on an un-opened database, MM no longer puts in a password in case you repair a non-MM 2.0 database.
|
| · | If a meet is setup with a maximum number per team that can score and the results are imported by TM4, those not eligible for points are given 99.9 points. The export file from MM has been revised to prevent the 99.9 points from being imported by TM4.
|
| · | When scoring double dual meets with Fastest Heat Only scoring, an error message occurred and this is corrected.
|
| · | When a Timed Final event is set for multi-age group Super Seeding, if there are not enough total swimmers to fill one heat, the Super Seeding is ignored and standard seeding is performed on the one heat.
|
| · | For Timed Final events using the new multi-age group Super Seeding feature, a correction has been made to handle situations where an error occurred if there was a leftover swimmer for the slowest heat.
|
| · | If a record is designated as a team record, only members of the selected team will be flagged as breaking the record in results. The update of records worked correctly in this situation, but results were flagging all entries who broke the record, regardless of team.
|
| · | When entering two or three watch times using Results by Lane, the Ctrl-K to calculate the result time is now operational.
|
| · | When using a timing console and two backup buttons, a new color of green is used to designate when one button time is within the 0.3 seconds of the pad time and one button is not within 0.3 seconds of the pad time. This often means one of the button times is not a good time and thus should not be used to adjust the pad time.
|
| · | When exporting USA-S Registration files, you now have the option to pick one team, one region, one LSC, male only, or female only.
|
| · | The demo Evaluation Edition of MEET MANAGER 2.0 has been revised to allow anyone to open previously completed databases for printing reports and viewing information. However, adding or editing of data is limited to the physical event numbers 1 through 6.
|
| · | In the Run, if there is a pad time with no backup times, the lane is now marked in blue to notify the administrative referee to check for a watch time to corroborate the pad time.
|
| · | In the Seeding Preview screen, you can now sort the eligible athlete list at the bottom by name, age, team abbreviation, or team name.
|
| · | When deleting an event in the Events Menu, the selected event becomes the next event in the list rather than re-setting to the first event.
|
| · | When scoring a mixed relay event and it is the first event to be scored, an error occurred and this is corrected.
|
| · | When importing a cl2 or sd3 entry file, an error could occur when importing relays and this has been corrected.
|
| · | There is a minor correction to the Meet Event export for events that are multi-age group and mixed.
|
| · | A new Teams report for addresses has been added which is more compact and prints in landscape.
|
| · | When scoring a Combined Event using total time, the total time occasionally has a weird total and this has been corrected.
|
| · | This is the initial release of Version 2.0. The Alpha version was released December 28, 2004. The Beta version was released March 1, 2005
|