| · | The Entry List Reports can now show up to 24 event entries per person rather than just 16 in prior versions.
|
| · | The Meet Event export for TEAM MANAGER has been revised to properly handle relay events setup as mixed gender multi-age group.
|
| · | When creating a Flat HTML file for the Meet Program where two events alternate women and men heats, the html file now correctly alternates the heats whereas before the heats did not alternate.
|
| · | MM can now download events numbered greater than 500 to the Colorado Timing System 6.
|
| · | When using the scoreboard option and results are being sent to the scoreboard for an event that is setup as multi-age group with more than one age group, there was a subscript error and this has been corrected.
|
| · | You can now use the Get Times button from the Run Menu for event numbers greater than 255 when using the CTS 5 or CTS 6.
|
| · | When listing results for finals for an event setup as ABC Final with slow to fast heat order and with multi-age group, the A-Final, B-Final naming was incorrect for the 2nd, 3rd, etc age groups within the multi-age group list.
|
| · | When creating a meet program and including start times and events with no entries, the no entries event would cause an error and this is corrected.
|
| · | If a relay event is setup with A relays only scoring and there are prelims and finals, the finals results from List and Reports did not match if you included prior results in the report and this is corrected.
|
| · | When seeding finals after prelims and when excluding foreigners or exhibition from the Championship final, if a foreigner or exhibition athlete was first alternate and an athlete scratched finals, the first alternate would be incorrectly moved into the final heat and this is now fixed.
|
| · | A Report Preference has been added to allow you to suppress the results "q" next to the qualifiers for the next round.
|
| · | The new "q" next to each qualifier from Prelims and Semi-Finals has a correction to not place the "q" next to DQ's and No Shows.
|
| · | Prelim and Semi-Final results now show a "q" next to each qualifier that will be advancing to the next round.
|
| · | The Real-Time Web Preferences Menu now has separate preferences for Heat/Psych sheets versus Results. This pertains to whether to show or not show records, time standards, entry qualifying times, event comments, prior round results, etc.
|
| · | 1 Mile and 2 Mile choices have been added to the Events Menu as distance choices for Open Water events. If the Custom distance is less than 10 for an Open Water event, it is considered to be Miles.
|
| · | When merging results from two events for Open Water races, the wave offset, if any, is also now merged.
|
| · | For Diving events, you can now specify that the event has 5 dives. Before, you could only choose 6 or 11.
|
| · | Reaction start times from the Omni-Sport 2000 were not being captured by MM since the last update and this is corrected.
|
| · | The team filter on the Record Breakers report was not working and this is corrected.
|
| · | The Meet Summary report for Records did not handle mixed event relays for Masters properly and this is corrected.
|
| · | Support for the UK-ASA DQ Codes has been added to the Meet Setup's current choices of Hy-Tek DQ Codes and FINA DQ Codes.
|
| · | In the Run Menu, Ctrl-E has been added as a short-cut key to toggle the Enter Results by Lane check box. In addition, Ctrl-Z has been added as a short-cut to Report Preferences.
|
| · | If a meet uses lanes 0 through 9, the Meet Entries Report did not show the heat and lane if an entry was seeded in lane 0. This is corrected.
|
| · | When manually entering Yard or SCM entry times in the Athlete Menu for the 400, 800, and 1500 meter events, the meet entry qualifying times being used were the converted to LCM times even though Yard or SCM meet entry qualifying times were in the database. This has been corrected to compare the entry time in these events with the matching course qualifying time if it is available, and if the time is too slow, a warning is presented.
|
| · | The New Zealand SNZ Points for 11 year old boys 100 meter breast and 10 & Under 200 meter back was incorrect and now the points for those two events reflect the proper point scores.
|
| · | The New Zealand SNZ Points for 15 and over boys were incorrect and now the points reflect the proper point scores.
|
| · | The last release caused the Athlete Menu's Find icon (and F6) to work incorrectly and this is now fixed.
|
| · | For Open Water when using wave offsets, there are some minor corrections made to prevent and error if no offset was entered for wave one.
|
| · | In the Run Menu, when switching from enter results by lane back to by heat, the heat placings could be incorrect until another event was selected and this is corrected.
|
| · | When updating records from the Records Menu using the Update button, DQ's with times were being used for the update and this is corrected.
|
| · | When scoring events set up as multi-age group with some age groups having two heats in finals and others having one heat in finals and when scoring down into prelims, scratched entries from the finals would still get points along with the entry that replaced them. This is corrected.
|
| · | Listing results with time standards has been revised to remove the time standard for DQ'd times and to show the time standard for exhibition swims.
|
| · | Psych Sheet lists using Multi-Age Split for events that are mixed with only one age group did not re-start the rank number with a 1 for the second gender and this is corrected.
|
| · | The Teams Report now has the option to exclude teams with no entries.
|
| · | For events that are multi-age group, Award Labels printed from the Labels Menu now put the specific multi age group in the event name rather than the over event age. The Awards button in Run already did this correctly.
|
| · | For multi-age group events where scoring goes down into the prior round, if there was a tie, the points awarded were not right and this is corrected.
|
| · | The new feature to flag ties with an asterisk in front of the place improperly flagged the first place in a multi-age group event that only had one swimmer in an age group. It also flagged NS, DNF, and DQ if there was more than one.
|
| · | A Point System designed by Swimming New Zealand has been added to the current set of 9 other special point systems. The system is called SNZ Points.
|
| · | The Check for Updates routine has been changed to a passive FTP system to avoid some firewall issues.
|
| · | When listing results from Run or from Reports, all ties are now flagged with an asterisk in front of the place. This has been added for easier detection of ties when determining swim-offs after scratches have been received right after prelims are finished.
|
| · | There is a correction to the British BAGCAT points calculation for Short Course Meters 100 IM, 200 IM, and 400 IM.
|
| · | When clicking Heat Malfunction in the Calculate Backup Times window, an error occurred and this is corrected.
|
| · | A problem with the subtracted splits on reports for relays is corrected. This problem appeared in the last release.
|
| · | A problem with not getting points scored for each event for a meet setup as Divisions by Time Standards has been corrected.
|
| · | The CTS Dolphin Backup Mode has been implemented. In this mode, the CTS Dolphin Wireless watches replace the standard watches used as backup to Timing Console Pad and Button Backup times. This eliminates the need for lane/timer sheets and provides the backup watch times directly to the MM computer. The Dolphin Backup Mode requires the purchase of the Backup Mode option for $149. The previously released Dolphin Stand Alone Mode where the wireless watches are the primary times does not require the purchase of any options and is built into the start-up MM.
|
| · | There is a new option to include splits when listing prior round results with finals.
|
| · | When listing prior round relay results with finals relay results, the relay names for the prior rounds are now included.
|
| · | The F11 upload of the last completed heat for Real Time Results now includes relay names and splits.
|
| · | When listing Psych Sheets with Multi-Age Splits, if there is an entry that is younger than the youngest age group, then that athlete is listed with the highest age group.
|
| · | When creating HTML relay results with relay take-off reaction times, the take-off reaction time could be truncated if a relay athlete name was a long name. The relay names listing has been revised to always show the entire reaction time by truncating the athlete name instead.
|
| · | Check for Updates and the Install Update routines have been revised to correct a problem on MS Vista machines which prevented the update from completing.
|
| · | Real Time Results upload methods have been improved to allow for Passive FTP which should eliminate most firewall issues and greatly speed up the upload of result files. Several other improvements are included such as automatically updating the team scores through the current event when using F12 to upload an event result with team scores.
|
| · | The export of results to the Swimming World Magazine web site has been changed to Passive FTP instead of Active FTP and this should improve reliability.
|
| · | NCAA POP forms now include what MM license printed the form and on what date. This is to give the form some authenticity.
|
| · | Entry List reports now have the option to exclude the entry times.
|
| · | When there is a limit on how many entries from each team can score in a given event, this limit now works correctly for finals of a two or three round event.
|
| · | The IOC country codes within MM have been updated to include 29 new countries and 8 code changes.
|
| · | Entry Cards have two new options for laser printers where 3 cards per 8.5 x 11 sheets are used. The new format for both new choices have the 3 watch times and official time locations lined up vertically one above the other in 4 rows. The selections are named 3.5" x 8.5" Type 2 and 3.5" x 8.5" BCSSA where the only difference between the 2 is the BCSSA has their logo on it.
|
| · | For BCSSA meets (Canada), there is a new choice to run as Divisions by Time Standards within a Divisions by Event meet.
|
| · | There is a correction to a problem recently introduced with the Timing Interface for ALGE, OSM6, Daktronics 1000, Power Time, and Incomar. The problem was Get Times not finding the result file. Finding the result file by Race Number was ok.
|
| · | This release provides an Interface for the new Colorado Time Systems Dolphin, a wireless stopwatch timing system available for 6 to 10 lanes with up to three wireless watches per lane.
|
| · | The new British 2007 Age Correction Factors for BAGCAT Points are included in this release.
|
| · | This release changes the Help files from .hlp files to .chm files in order to accommodate the fact that the MS Vista operating system does not support .hlp files.
|
| · | There is a correction to the Warm-Up report for mixed events in reporting the number of males versus the number of females.
|
| · | Canadian SNC Points have been removed from the available point system choices because Canada no longer supports the SNC points and uses FINA points instead.
|