JD Ctrl-J Selection
|Top Previous Next|
From the Run Screen, click on the JD button or press Ctrl-J. MM will display the finished results sorted place.
•A Judge's Decision is used at the end of an event or heat to "manually" edit the Placing and/or Points for a given result. For example, suppose the watch times indicated that Billy finished in 1st place and George in 2nd place. If the Place/Finish Judge saw it otherwise, you might still want to enter the watch times but edit the Place and Points for those two Athletes to reflect what the Place/Finish Judge actually saw.
•From the Run Screen, click on the JD button or press Ctrl-J. MM will display the finished results sorted by time and place. Use your mouse to edit the Place using the JD PL column or to edit the Points using the JD Points column. To change an entry's points to "zero points", enter "-1" in the JD Points column. Click the Reset button to clear the JD PL and JD Points column. After making changes, click OK.
•For Timed Final events, you can also edit the place for the Heat Place/Finish. Just click on the JD Heat PL column and enter the heat place. This "new" Heat Place will show up on Award Labels for heat finishers as well as the Results Report sorted by heat. Note the JDHeatPL column below which is not shown in the above window because the above window is for finals after a Prelim has been run.
•For events setup as A-Final / B-Final Style with 2 or more final heats, as long as one or more final heats are not completed, you can use the JD button to override heat places to print or display correct results for scoreboards or awards. Once all heats are completed, there is no need to use JD Heat places since the overall JD places can be set. Caution is advised in setting JD Heat places since these settings can cause strange overall results if not done properly.