Chronomix 737

Top  Previous  Next

To download times from the Chronomix 737, you must be in the OW Module. To select the OW Module, click Run / OW Module, select an event, and then click Download at the top. Then click the Start Download button from within the MM Download window to move into the mode where it can receive data. On the Chronomix 737, press B for Baud rate, and press 1 to check the baud rate. It should say 9600. If it does not, press 1 to select 9600, and then press B again. Now press 3 for Memory and press 1 for send data to computer only. After transmission is completed, press B again to place the Chronomix back in its normal timing mode. Then click Close in MM to exit the Download window.


After the download is complete, see the next section on Reading the Downloaded File at the bottom of the Open Water Button Timer Interfaces topic.